CTEK MXS 5.0T 5 Amp Smart Battery Charger 12V

The MXS 5.0 TEST & CHARGE is suitable for use with batteries from 1.2Ah-110Ah. Its testing function gives you three easy to use programs to test battery voltage, start power and alternator performance to give you a complete picture of battery and vehicle charging system health. The MXS 5.0 TEST & CHARGE also includes a patented automatic desulphation program, a special Recond mode for reconditioning deeply discharged batteries and CTEK’s patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods.

Features:

• Charges batteries from 1.2Ah up to 110Ah
• Patented float/pulse maintenance phase
• Easy to read LED display
• Splash and dust proof (IP65)
• Safe spark free operation
• Reverse polarity protected
• Short circuit proof

Technical Data

Battery capacity - 1.2–160 Ah

Charging category - AC charging

Back current drain - *Corresponding to less than 1 Ah/month

Back Current Drain TEXT*) - Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.

Battery voltage - 12 V

Battery chemistry - Lead acid (AGM, GEL, EFB, MF, CaCa)

Ambient operating temperature - -20 ?C to +50 ?C (- 4 °F to +122 °F)

Input - 220–240 VAC, 50–60 Hz, 1.1 A

Output - 14.4/14.7/15.8 V, 4.3 A

Start voltage - 2.0 V

Ripple - **Less than 4 %

Ripple TEXT**) - The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.

Battery types - 12 V:; WET; MF; Ca/Ca; AGM; GEL

Ingress protection - IP65

Warranty - 5 years

Warranty headline - Limited Warranty