Suomy Track-1 E06 Plain Helmet
TRACK-1 is the New Generation full face helmet by Suomy, made in TRICARBOCO composite (Kevlar/Carbon/Fiberglass), characterized by dynamic and performance shapes, designed and developed in wind tunnel to have the best performances and balance between street and track use.
Inners are produced by the best technologies to guarantee reliability and comfort to all bikers, while typical riders needs join touring-racing ones to create a combination of technical solutions, suitable to all routes and tracks.
SHELL
The shell is made of TRICARBOCO fiber, a new composite that allows to obtain a lighter shell but at the same time harder and more protective.
The new composite is a mixture of carbon with different weight/breaking loads linked up with aramid resins and fiberglass that ensure a light shell but much more resistant to impacts To satisfy even the most exigent customers, TRACK-1 is produced in two different shells: M and L
INTERNAL PROTECTIVE POLYSTYRENE
Internal polystyrene liner is realized in three sizes (S, M and L) to obtain a better ergonomics.
Studied in four variable densities allows a gradual and progressive absorption of the power produced by the impact.
Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is crucial for the absorption of the residual power.
A different densities of the polystyrene allows to optimize the mechanical performance of the shell-polystyrene system, ensuring the maximum level of absorption in all areas of the helmet.
VISOR
The visor is in PC injected, antiscratch, optic in class 1 with variable thickness between 2 and 3.5 mm.
The visor has a side lock for a better stability and easily removable without any tool thanks to a practical mechanism.
PINLOCK®
TRACK-1 is PINLOCK® Max Vision 70 lens ready.
VENTILATION
Internal polystyrene was studied to work in symbiosis with the three air intakes on the external fiber shell.
Particular channelings, obtained on polystyrene, allow an optimal ventilation of air flow intake into the helmet and a quickly exhaust of the hot air.
INNERS
The cheek pads and the internal comfort padding can be removed, washed and replaced.
They are made in hydrocool, a precious fabric with specific fibers that offers the following features:
Easy outflow of body moisture
Keep the correct temperature
Light fabric, soft and breathable
Cheek pads are ready for Bluetooth earphone
Cheek pads have an emergency system to quickly remove them in case of needs.
RETENTION SYSTEM
The chin is provided with double D-ring retention system enabling an easy release of the retain system.
Note: All our helmets are purchased directly from Australian supplier and carry the ECE 22.05 or 22.06 standard
Suomy Track-1 E06 Plain Helmet
TRACK-1 is the New Generation full face helmet by Suomy, made in TRICARBOCO composite (Kevlar/Carbon/Fiberglass), characterized by dynamic and performance shapes, designed and developed in wind tunnel to have the best performances and balance between street and track use.
Inners are produced by the best technologies to guarantee reliability and comfort to all bikers, while typical riders needs join touring-racing ones to create a combination of technical solutions, suitable to all routes and tracks.
SHELL
The shell is made of TRICARBOCO fiber, a new composite that allows to obtain a lighter shell but at the same time harder and more protective.
The new composite is a mixture of carbon with different weight/breaking loads linked up with aramid resins and fiberglass that ensure a light shell but much more resistant to impacts To satisfy even the most exigent customers, TRACK-1 is produced in two different shells: M and L
INTERNAL PROTECTIVE POLYSTYRENE
Internal polystyrene liner is realized in three sizes (S, M and L) to obtain a better ergonomics.
Studied in four variable densities allows a gradual and progressive absorption of the power produced by the impact.
Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is crucial for the absorption of the residual power.
A different densities of the polystyrene allows to optimize the mechanical performance of the shell-polystyrene system, ensuring the maximum level of absorption in all areas of the helmet.
VISOR
The visor is in PC injected, antiscratch, optic in class 1 with variable thickness between 2 and 3.5 mm.
The visor has a side lock for a better stability and easily removable without any tool thanks to a practical mechanism.
PINLOCK®
TRACK-1 is PINLOCK® Max Vision 70 lens ready.
VENTILATION
Internal polystyrene was studied to work in symbiosis with the three air intakes on the external fiber shell.
Particular channelings, obtained on polystyrene, allow an optimal ventilation of air flow intake into the helmet and a quickly exhaust of the hot air.
INNERS
The cheek pads and the internal comfort padding can be removed, washed and replaced.
They are made in hydrocool, a precious fabric with specific fibers that offers the following features:
Easy outflow of body moisture
Keep the correct temperature
Light fabric, soft and breathable
Cheek pads are ready for Bluetooth earphone
Cheek pads have an emergency system to quickly remove them in case of needs.
RETENTION SYSTEM
The chin is provided with double D-ring retention system enabling an easy release of the retain system.
Note: All our helmets are purchased directly from Australian supplier and carry the ECE 22.05 or 22.06 standard
