The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today’s ATVs and UTVs.
- 40% higher tensile strength than conventional CV boo material, suitable for the high joint angles of modern ATVs and UTVs.
- 50% more abrasion-resistant than conventional CV boot material to ensure a long life in harsh off-road environments.
- Rubber compound is tested to -40° F to ensure good performance and long life at low temperatures.
- Lithium-based Molybdenum Grease insures good lubrication for long CV joint life. Easier to install than most OEM and aftermarket boots. Sold each. Does not require the use of a ""Banding Tool"".
Specifications:
- H: 89mm
- SD: 17.5mm LD: 60mm
- Shaft I.D.: 17.5
- CV Body I.D.: 60
- Length 89
Kits include:
- Two stainless steel clamps that are designed to be tightened without the use of special tools.
2006 Can-Am Outlander 400
2006 Can-Am Outlander 800
2007 Can-Am Outlander 400 4WD
2007 Can-Am Outlander 500 4WD
2007 Can-Am Outlander 650
2007 Can-Am Outlander 800
2007 Can-Am Renegade 800 4WD
2008 Can-Am Outlander 400 4WD
2008 Can-Am Outlander 500 4WD
2008 Can-Am Outlander 500 XT 4WD
2008 Can-Am Outlander 650
2008 Can-Am Outlander 650 XT 4WD
2008 Can-Am Outlander 800
2008 Can-Am Renegade 500
2008 Can-Am Renegade 800 4WD
2008 Kawasaki KVF750 Brute Force
2009 Can-Am Outlander 400 4WD
2009 Can-Am Outlander 500 4WD
2009 Can-Am Outlander 500 XT 4WD
2009 Can-Am Outlander 650 4WD
2009 Can-Am Outlander 650 XT 4WD Power Steering
2009 Can-Am Outlander 800
2009 Can-Am Renegade 500
2009 Can-Am Renegade 800 4WD
2009 Kawasaki KVF360 Prairie
2009 Kawasaki KVF650 Brute Force
2009 Kawasaki KVF750 Brute Force
All Balls Racing CV Boot Kit (19-5027)
Order and get 29 reward points
Earn points by signing up for our rewards program
The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today’s ATVs and UTVs.
- 40% higher tensile strength than conventional CV boo material, suitable for the high joint angles of modern ATVs and UTVs.
- 50% more abrasion-resistant than conventional CV boot material to ensure a long life in harsh off-road environments.
- Rubber compound is tested to -40° F to ensure good performance and long life at low temperatures.
- Lithium-based Molybdenum Grease insures good lubrication for long CV joint life. Easier to install than most OEM and aftermarket boots. Sold each. Does not require the use of a ""Banding Tool"".
Specifications:
- H: 89mm
- SD: 17.5mm LD: 60mm
- Shaft I.D.: 17.5
- CV Body I.D.: 60
- Length 89
Kits include:
- Two stainless steel clamps that are designed to be tightened without the use of special tools.
2006 Can-Am Outlander 400
2006 Can-Am Outlander 800
2007 Can-Am Outlander 400 4WD
2007 Can-Am Outlander 500 4WD
2007 Can-Am Outlander 650
2007 Can-Am Outlander 800
2007 Can-Am Renegade 800 4WD
2008 Can-Am Outlander 400 4WD
2008 Can-Am Outlander 500 4WD
2008 Can-Am Outlander 500 XT 4WD
2008 Can-Am Outlander 650
2008 Can-Am Outlander 650 XT 4WD
2008 Can-Am Outlander 800
2008 Can-Am Renegade 500
2008 Can-Am Renegade 800 4WD
2008 Kawasaki KVF750 Brute Force
2009 Can-Am Outlander 400 4WD
2009 Can-Am Outlander 500 4WD
2009 Can-Am Outlander 500 XT 4WD
2009 Can-Am Outlander 650 4WD
2009 Can-Am Outlander 650 XT 4WD Power Steering
2009 Can-Am Outlander 800
2009 Can-Am Renegade 500
2009 Can-Am Renegade 800 4WD
2009 Kawasaki KVF360 Prairie
2009 Kawasaki KVF650 Brute Force
2009 Kawasaki KVF750 Brute Force
